Hot Forging
Brass rods are produced according to EN12165 and UBA standards, these type of brass rods are suitable for hot forging and good machinablity. Our products meets the requirements of ROHS and REACH diretives.
Brass Rods
Billets
| STANDARD ALLOYS | ||||||||||||||
| ALLOY | Cu | Pb | Sn | Fe | Ni | Al | Mn | As | Si | P | Zn | Others | Design & ref to normative | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CW617N UBA | Min Max |
57,0 59,0 |
1,6 2,2 |
- 0,3 |
- 0,3 |
- 0,1 |
- 0,05 |
- - |
- - |
- 0,03 |
- - |
Rest - |
- 0,2 |
CuZn40Pb2 DIN 50936-6 |
| Standard alloy for hot forging. Included in 4MS "Positive List. | ||||||||||||||
| CW617N | Min Max |
57,0 59,0 |
2,0 2,5 |
- 0,3 |
- 0,3 |
- 0,3 |
- 0,05 |
- - |
- - |
- - |
- - |
Rest - |
- 0,2 |
CuZn40Pb2 EN12165 |
| Standard alloy for hot forging with lead < 2%. Included in 4MS "Positive List. | ||||||||||||||
| CW612N UBA | Min Max |
59,0 60,0 |
1,6 2,2 |
- 0,3 |
- 0,3 |
- 0,1 |
- 0,05 |
- - |
- - |
- 0,03 |
- - |
Rest - |
- 0,2 |
CuZn39Pb2 DIN 50930-6 |
| High copper content alloy for hot forging. Included in 4MS "Positive List. | ||||||||||||||
| ALLOYS RESISTANT TO CORROSION | ||||||||||||||
| ALLOY | Cu | Pb | Sn | fe | Ni | Al | Mn | As | Si | P | Zn | Others | Design & ref to normative | |
| CW602N | Min Max |
61,0 63,0 |
1,7 2,8 |
- 0,1 |
- 0,1 |
- 0,3 |
- 0,05 |
- 0,1 |
0,02 0,15 |
- - |
- - |
Rest - |
- 0,2 |
CuZn36Pb2As |
| Standard anti-dezincification alloy for hot forging. | ||||||||||||||
Casting
Baylan uses modern casting technologies to cast ingots according to EN1982 and UBA standards. Ingots can be produced by continues casting or die casting depending on the custumer’s choice. Each Ingot weight is approximately 10-12 kg.
Brass Ingots
| STANDARD ALLOYS | ||||||||||||||
| ALLOY | Cu | Pb | Sn | Fe | Ni | Al | Mn | As | Si | P | Zn | Others | Design & ref to normative | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CC770S UBA | Min Max |
62,0 64,0 |
0,2 1,6 |
- 0,3 |
- 0,3 |
- 0,2 |
0,5 0,7 |
- 0,1 |
0,04 0,14 |
- 0,02 |
- - |
Rest - |
- 0,2 |
CuZn36Pb-C |
| Included in 4MS "Positive List. | ||||||||||||||
| CC757S UBA | Min Max |
58,0 63,0 |
0,2 1,4 |
- 0,5 |
- 0,3 |
- 0,2 |
0,3 0,9 |
- 0,05 |
- - |
- 0,05 |
- - |
Rest - |
- 0,2 |
CuZn39Pb1Al-C |
| Included in 4MS "Positive List. | ||||||||||||||
| CC752S | Min Max |
61,0 63,0 |
1,4 1,6 |
- 0,3 |
- 0,3 |
- 0,2 |
0,5 0,7 |
- 0,1 |
0,09 0,13 |
- 0,02 |
- - |
Rest - |
- 0,2 |
CuZn35Pb2Al-C DIN50930-6 |
| CC752S | Min Max |
61,5 64,5 |
1,5 2,2 |
- 0,3 |
- 0,3 |
- 0,2 |
0,3 0,7 |
- 0,1 |
0,04 0,14 |
- 0,02 |
- - |
Rest - |
- 0,2 |
CuZn35Pb2Al-C EN 1982 |
| CC754S | Min Max |
58,0 60,0 |
0,5 2,5 |
- 0,8 |
0,4 0,7 |
- 1,0 |
0,4 0,8 |
- 0,5 |
- - |
- 0,05 |
- 0,02 |
Rest - |
- 0,2 |
CuZn39Pb1Al-C EN 1982 |
| CC753S | Min Max |
58,0 60,0 |
1,8 2,5 |
- 0,8 |
0,5 0,8 |
- 0,1 |
0,4 0,8 |
- 0,1 |
- - |
- 0,05 |
- - |
Rest - |
- 0,2 |
CuZn37Pb2Ni1AlFe-C EN 1982 |
